repeatability error
英 [rɪˌpiːtəˈbɪlɪti ˈerə(r)]
美 [rɪˌpitəˈbɪlɪti ˈerər]
网络 重复性误差
双语例句
- Accurate and durable locating points and part holding features to attain maximum repeatability and reproducibility error.
准确和耐久的定位点和部份需要可以获得最大的重复性和再现性误差特性。 - A method for accuracy determination and repeatability of positioning of medium-accuracy numerically controlled machine tools based on step gauge was proposed. In the system, an auto-deviation measurement and auto backlash error compensation were developed.
提出一种低成本基于步距规的误差补偿系统，该系统可以实现普通精度级数控机床位置精度评定，并通过软件自动修改误差补偿表，使机床精度得以强化。 - The testing results show that the system is of good repeatability ( repeatability error is less than 2%), high reliability and high automation.
测试结果表明：系统重复性好（重复性误差小于2%）、可靠性高、自动化程度高。 - Experiments show that the angular calibration has a good repeatability and position calibration error is less than 2 pixels.
实验表明，角度标定重复性好，位置标定误差小于2个像素。 - The repeatability of the data in three-testing is fine, and the maximum error is 2.1%.
三次测量数据重复性好，最大重复性误差为2.1%。 - The data tested by the sensor are steady, and the repeatability of the data is fine, and the maximum error is ( 0.28%).
测量数据重复性好，最大误差0.28%。 - The experimental results show that the travel range is 100 mm, the settling time is less than 40 ms and the repeatability error is 10 nm.
实验研究表明：系统的动态和稳态性能良好，该定位机构的最大工作行程100mm，稳定时间小于40ms，重复定位精度10nm。 - The software can check the log data quality of several aspects, such as log tools calibration, logging speed, log data repeatability and error of depth, log data quality influenced by potential factors and bad borehole conditions.
该软件可对测井仪器刻度、测井速度、测井资料重复性及深度误差、隐性因素影响测井资料质量及井况不好情况下等几个方面的测井资料质量进行检测。 - The factor effect on CIE coordinates error is analyzed, system error caused by standard source transfer is argued and the background signal subtraction method is brought forward. The repeatability error caused by random noise is also analyzed.
对影响色坐标的各项因素进行了误差分析，分析了标准传递带来的系统误差和基线扣除方法，分析了随机噪声带来的重复性误差。 - The testing results show that the linearity is good, the uniformity error is within 7 ‰, the stray light is smaller than 1 μ W, the repeatability error is within 7 ‰, and the long stability error is within 8 ‰.
测试结果表明：线性比较好，均匀性误差在7‰以内，杂光小于1μW，重复性误差小于7‰，长期稳定性误差小于8‰。 - The principle is expatiated. The result shows that the repeatability of the method is within the range of the allowable repeatability error.
阐述方法原理，考察方法的重复性在允许重复性误差范围内； - The main error sources of pulse width measurement, including counter's repeatability, trigger level timing error, time base error, the amplifier hysteresis error, LSD displayed error, etc. are analyzed.
分析了脉冲信号源脉宽测量时的主要误差来源，包括计数器测量重复性、触发定时误差、时基误差、放大器滞后误差、分辨力误差等； - Four main repeatability errors, i. e grating constant error, zero point scaling error, measuring error for turn angle and measuring error for angle between incident light and diffraction light are analyzed according to the measuring principle using plane glare grating as spectral elements of far-infrared spectrometer.
采用平面闪耀光栅作为光谱元件的远红外光谱测量原理，分析了四种主要的重复性误差：光栅常数制造误差、零点标定误差、转角测量误差、入射光束与衍射光束的夹角测量误差。 - Multi-resolution is used to analyze the coordinate components repeatability, and the error characters of coordinate time series are investigated.
使用多种分析方法对框架点的坐标分量重复性进行了分析，对坐标时间序列的误差特征进行了研究。 - The functional test of system, including repeatability test and error test, was completed.
完成系统整体性能测试，进行了系统重复性试验与系统误差检验。 - Repeatability error and uncertainty of a group of LED lamps data are analyzed. The results show that LED lamps distribution photometer has good reliability and accuracy.
对LED灯具的一组多次测量数据进行重复性误差和不确定度分析，结果表明LED灯具分布光度计具有很好的可靠性和准确性。 - Those fertilization experiments were done repeatability. The results showed that the average error of each fertilization test were relatively low, the coefficient of variation was not large.
对以上施肥试验还进行了重复性试验，每次施肥试验的平均误差都比较低，变异系数也不大，说明施肥试验的可重复性很好。 - Furthermore, the straightness, parallelism and repeatability are evaluated. ( 6) The error calibration models are built for the 3-TPT and 3-TPS HMTs. The parameter identification method is deduced based on the gene algorithm.
另外，还对机床样机的直线度、平行度和重复位置精度进行了初步评定。（6）针对两种混联机床建立了误差标定模型，并基于遗传算法阐述了辨识标定模型参数的理论方法。